Dp Dual Trac 20 Assembly Instructions Full Patched ✮

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Carriage sticks halfway | Uprights not parallel | Loosen base bolts, shim one side | | Cable rubs against metal | Misrouted pulley | Remove cable, reroute per diagram | | Handles don’t return | Too little tension | Tighten barrel adjusters | | Clicking noise during pull | Dry pulley bearing | Lubricate with lightweight oil | | Weight plates rattle | Missing nylon silencers | Install felt silencers between plates |

Ensure you have the base stabilisers, main frame, tension cable, handlebars, seat post, and pedals. Replacement parts like cable assemblies can still be found at Fitness Repair Parts Assembly Steps 1. Stabiliser Bar Installation dp dual trac 20 assembly instructions full

Clear a flat, level area at least 8' x 6' for assembly and operation. | Problem | Likely Cause | Solution |

Slide the dual-action handlebars onto the pivot axles at the base of the mast. Slide the dual-action handlebars onto the pivot axles