The EverStart Battery Charger 60108M is a versatile smart charger and maintainer designed for a variety of lead-acid batteries, including Standard , AGM , and Gel types. This guide provides a comprehensive manual on how to safely operate, troubleshoot, and maximize the life of your device. Core Features and Specifications is categorized as a "smart" charger because it automatically adjusts its charging profile based on the battery's needs. Charging Modes: Includes 2A (trickle charge) for maintenance, 10A (quick charge) for standard use, and 25A (rapid charge) for faster recovery. Compatibility: Works with 6V and 12V automotive and marine batteries. Digital Display: Provides real-time feedback on battery capacity, charging status, and fault alerts. Safety Protections: Built-in protection against reverse polarity (clamping to the wrong terminals) and short circuits. Operating Instructions: How to Charge Your Battery Follow these steps to ensure a safe and effective charge: Preparation: Ensure your battery is in a well-ventilated area. Clean the battery terminals of any corrosion using a wire brush to ensure a strong connection. Connect the Clamps: Step 1: Attach the red (positive +) clamp to the positive terminal of the battery. Step 2: Attach the black (negative -) clamp to the negative terminal or a grounded metal part of the vehicle frame away from the battery. Plug and Power: Plug the charger into a standard 120V AC outlet . Select Settings: Choose the Battery Type (Standard, AGM, or Gel). Select the Charging Rate . For the safest, most effective charge that prolongs battery life, use the 2A trickle charge setting. Monitor Progress: The LCD screen will display a progress gauge. When the battery reaches 100% , the charger will indicate it is "Full" and often automatically switch to a maintenance mode to prevent overcharging. Disconnection: Once finished, unplug the charger from the wall first, then remove the black clamp, followed by the red clamp. Troubleshooting and Error Codes If the charger doesn't behave as expected, check these common issues: How to Use a Car Battery Charger - Ron Bouchard's Nissan

Everstart Battery Charger 60108m Manual: The Complete Guide to Operation, Safety, and Troubleshooting If you own a vehicle, boat, lawn tractor, or any piece of equipment with a lead-acid battery, a reliable charger is an essential tool. The Everstart 60108m (often grouped with the 60108 series by Walmart’s in-house brand) is one of the most popular affordable automatic battery chargers on the market. However, like any piece of technical equipment, you cannot operate it safely or effectively without the proper instructions. This article serves as your complete Everstart Battery Charger 60108m Manual . Whether you have lost the original physical booklet or need a deeper understanding of flashing lights and error codes, this guide covers setup, operation, safety warnings, and troubleshooting.

Note on the Model: The "60108m" is frequently listed as a 6/12 Volt, 2/10/40 Amp automatic battery charger. If your unit looks slightly different, it is likely a revision of the same model (e.g., 60108i). The instructions remain largely identical.

Part 1: Safety First – Critical Rules Before You Plug In Before you even touch the clamps, review the safety section of the Everstart 60108m manual. Lead-acid batteries contain sulfuric acid and emit explosive hydrogen gas. Ignoring these rules can result in injury or property damage. 1.1. Explosion and Fire Prevention

No Sparks: Never connect or disconnect clamps while the charger is plugged into an AC outlet. Always plug the charger into the wall after connecting the clamps to the battery (for manual mode) or follow the automatic sequence. Ventilation: Always charge a battery in a well-ventilated area. Gasses can accumulate under hoods or in enclosed battery boxes. No Smoking: Keep sparks, flames, and cigarettes away from the battery.

1.2. Personal Protective Equipment (PPE)

Wear safety glasses and gloves. If acid splashes into your eyes, use an eyewash station and seek medical attention immediately. Remove all jewelry (rings, watches, metal necklaces) to prevent accidental arcing.

1.3. Connecting to the Battery – The Right Order The manual specifies a strict sequence to avoid sparks at the battery terminal:

Positive (RED) clamp to the positive + terminal. Negative (BLACK) clamp to the negative - terminal on a vehicle chassis (not the battery post) for negative-ground vehicles. For a battery out of the vehicle, connect to the negative post. Reverse for positive-ground vehicles (rare in modern cars).

Part 2: Understanding Your Everstart 60108m Features The 60108m is not a simple "dumb" charger. It includes microprocessors for automatic operation. Here is what the unit offers:

Voltage Selection: 6V (for garden tractors, old motorcycles) or 12V (cars, trucks, SUVs, boats). Amp Rate Selection:

2 Amps (Trickle): For small batteries (motorcycles, ATVs) or maintaining a full battery over winter. 10 Amps (Slow/Maintenance): Ideal for car batteries overnight. 40 Amps (Fast/Boost): For quickly charging a depleted battery or providing engine start assist. Do not use 40A for small batteries.