Before operating the device, familiarize yourself with the external controls. While specific layouts can vary slightly by manufacturing year, most Iwata 2CRH models feature:
A: Search for "Iwata 2CRH ribbon" or "Bundy clock ribbon Epson ERC-09." They are widely available on Amazon and office supply stores for ~$5 each.
Use or - to set the current hour. Note: 24-hour format is common during setup. 04 Minute
The Iwata 2CRH is a robust, traditional mechanical Bundy Clock (Time Clock) used for tracking employee work hours via time cards. As a mechanical device, it requires specific setup procedures for time, date, and printing alignment.
The "2C" in the model likely refers to capability: The clock can switch ribbon position (black for on-time, red for late) based on a mechanical cam connected to the minute wheel.
| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Clock does not move | Dead mains, blown fuse, jammed gears | Check power, replace fuse (slow-blow), oil movement | | Prints faint / no print | Worn ribbon, dirty print wheels | Replace ribbon, clean type with isopropyl alcohol | | Always prints red | Color-change cam stuck, spring broken | Open movement, check cam follower near 12 o’clock wheel | | Prints wrong date | Manual date knob turned, or date wheel jam | Advance date to correct by turning only | | Card jams | Bent card guide, foreign object in slot | Remove debris, gently realign guide with pliers | | Does not print when card inserted | Micro-switch disconnected, solenoid dead | Check switch continuity, listen for solenoid click |
How It Works
SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER iwata 2crh bundy clock manual
SPECIAL OFFER: GET 10% OFF