Prc 6020 Technical Data - Rs Hx

| Parameter | Specification | |-----------|----------------| | | 1.6 MHz to 30 MHz (continuous) | | Channel Spacing | 10 Hz, 100 Hz, 1 kHz, 2.8 kHz, 3 kHz | | Mode of Operation | USB, LSB, AME, CW, FSK, ALE (2G & 3G), Data (STANAG 4539) | | RF Output Power | 20 W PEP / 20 W Average (manpack configuration); 50 W / 150 W with external amplifier | | Receiver Sensitivity | Better than 0.35 µV for 10 dB (S+N)/N at 2.8 kHz SSB | | Selectivity | 2.3 kHz / 2.8 kHz / 3 kHz (selectable) | | Frequency Stability | ±0.5 ppm (–30°C to +60°C) | | Intermodulation (3rd order) | > 80 dB | | Spurious Emissions | < –60 dB (below carrier) | | Audio Output (internal speaker) | 1 W into 8 Ω | | Power Supply | 10.5 V to 16 V DC (nominal 12 V) | | Battery Type | Lithium-Ion 14.4 V / 6.8 Ah (hot-swappable) | | Power Consumption (Rx) | < 250 mA (standby), < 1.5 A (receive with backlight) | | Power Consumption (Tx) | < 6 A at 20 W PEP | | Dimensions (HxWxD) | 85 mm x 260 mm x 290 mm (excluding protrusions) | | Weight | 4.2 kg (with battery and handset) | | Operating Temperature | –30°C to +60°C | | Storage Temperature | –40°C to +80°C | | Water/Dust Protection | IP67 (submersible up to 1 m for 30 minutes) | | MIL-STD | MIL-STD-810G (shock, vibration, humidity, salt fog) | | Data Interface | RS-232 (up to 38.4 kbps), USB, Ethernet (optional) | | Encryption | AES-256 (COTS or Type 1 via external module) | | GPS | Integrated 12-channel, cold start < 45 s |

Technical specifications for maintenance often list specialized parts like the Xilinx XC3042A FPGA and specific Logic/Codec ICs for signal processing. Data Terminal: rs hx prc 6020 technical data

Typical compliance data for units of this class includes: ALE (2G & 3G)