💡 Before flashing any firmware, identify your board version (usually MKS Robin Nano v1.2 or v1.3) and your stepper drivers, as these dictate your configuration settings. To help you get started with the right firmware setup: Tell me if you have a Raspberry Pi available. Mention your motherboard version (v1.2 or v1.3).
This is excellent news for enthusiasts because this board architecture is widely supported by the open-source community, particularly by the creators of the popular "Bluer" series printers. This hardware similarity allows for robust, third-party firmware solutions that far outperform the stock binary files provided by the manufacturer. two trees sapphire pro firmware best
Do not just download the first .bin file you find. Join the "Two Trees 3D Printers" Discord or the r/TwoTrees subreddit. Look for the pinned messages in the #Sapphire-Pro channel for the most recent, verified "best" firmware build as of this month. Your Sapphire Pro is a race car on blocks right now—the best firmware is the key to the ignition. 💡 Before flashing any firmware, identify your board
| Parameter | Recommended Value | |-----------|------------------| | Bed size | X: 240, Y: 240, Z: 250 (or 260) | | Probe offset (BLTouch) | Depends on mount | | Max feedrate (X/Y) | 300 mm/s | | Max acceleration | 1000 mm/s² | | PID autotune | Run for bed & hotend | This is excellent news for enthusiasts because this